-CHUCK SIZE 500 MM.
-HOLE SIZE 66 MM.
-SWING WITHOUT GAP 900 MM.
-SWING WITH GAP 650 MM.
-CROSS SLIDE 410 MM.
-SPINDLE SPEED 38 – 1,200 RPM.
-WORK LENGTH 1,500 MM.…

-TABLE SIZE 1,320 * 320 MM.
-TRAVEL AXIS  X 850 * Y 350 MM.
-SPINDLE NT 40 SPEED 50-3,500RPM.
-AUTO CUTTING FEED 2 AXIS
-WITH DIGITAL SCALE 3AXIS…

-MODEL CM8B
-CAPACITY 10 HP.
-WITH AIR DRYER
-PRESSURE 0.83 MPA…

-CHUCK SIZE 14 INCH. HOLE SIZE 120 MM.
-SWING OVER BED 520 MM.
-SWING WITH OUT GAP 770 MM.
-CROSS SLIDE 295 MM.
-SPINDLE SPEED 24 -1,000 RPM.
-WORK LENGTH 750 MM.…

-CONTROL FANUC 16iMB
-TABLE SIZE 650 * 400 MM.
-TRAVEL AXIS X 500 Y- 400 Z- 330 MM.
-ATC 14 TOOLS BT 30
-MAX SPINDLE SPEED 10,000 RPM.…

-CONTROL OSP-500LG
-CHUCK SIZE 7 INCH.
-TURRET 8 STATIONS
-TRAVEL AXIS X 120 / Z 270MM.
-SPINDLE SPEED 150-5000 RPM.
-WITH TOOL SETTER
-WITH TAIL STOCK…

-CONTROL OSP E-10L
-CHUCK SIZE 8 INCH.
-MAX. HOLE THROUGH SPINDLE 50 MM.
-MAX. SWING OVER BED 450 MM.
-SPINDLE MAX. SPEED 45- 4,200 RPM.
-TURRET 8 TOOLS
-AXIS TRAVEL X:155/Z: 320 MM.…

-SWING RADIUS 1,000 MM.
-SPINDLE SPEED 85-1,380 RPM.(60Hz)
-AUTO DRILL FEED CUT
-MANUAL AXIS LOCK SYSTEM…

-CONTROL PLC OMRON
-MAIN MOTOR 7.5 HP.
-WITH BAR FEED 4 M.
-CUTTING CAPACITY 10-50MM.
-WITH OIL MIST OPTION
-WITH COOLANT OPTION
-CUTTING SPEED 17-200 RPM.…

-CONTROL FANUC 16MA
-TABLE SIZE 1,400*560MM.
-SPINDLE MOS TAPER BT40 ATC 30
-SPINDLE MAX SPEED 8,000 RPM.
-TRAVEL AXIS X 1,050 * Y 550 * Z 560 MM.…

-MODEL YZ-8C
-TABLE SIZE 350*1,500 MM.
-AXIS TRAVEL X 850 Y350 Z 445 MM.
-SPINDLE SPEED 45 -1,600 RPM.
-SPINDLE TAPER NT50
-WITH LINEAR SCALE…

-CONTROL OSP-500LG
-CHUCK SIZE 7 INCH.
-TURRET 8 STATIONS
-TRAVEL AXIS X 120 / Z 270MM.
-SPINDLE SPEED 150-5000 RPM.…

-CONTROL FANUC 16iTA
-CHUCK 6 INCH. WITH CENTER
-TURRET 12 STATIONS
-X / Z TRAVEL  230 / 520.MM.
-SPINDLE SPEED 50-5,000RPM.
-WITH TOOL SETTER
-WITH MILLING FUNCTION
-WITH C-AXIS ROTARY MODE…

-MODEL VS695ADII-37
-CAPACITY 50 HP
-PRESSURE 0.85-0.6 MPa.
-CAPACITY 6.05-6.95 M3/MIN
-WITH BULIT IN AIR DRYER UNIT
-INVERTER SYSTEM…

-CONTROL OSP U-100L
-CHUCK SIZE 8 INCH.
-MAX. HOLE THROUGH SPINDLE 50 MM.
-MAX. SWING OVER BED 450 MM.
-SPINDLE MAX. SPEED 45- 4,200 RPM.
-TURRET 8 TOOLS
-AXIS TRAVEL X:155/Z: 320 MM.
-WITH TAIL STOCK…

-CONTROL FANUC 21TB
-CHUCK 8 INCH
-TURRET 8 STATIONS
-X / Z TRAVEL  310 / 370.MM.
-MAX. TURNNING OD. 310 MM.
-MAX. SWING OD. 410 MM.
-SPINDLE SPEED 3,200RPM.…

-CONTROL FANUC OMC
-TABLE SIZE 1,700 * 700 MM.
-MAX SPINDLE SPEED 30-2,100 RPM.
-WITH LOW AND HIGH GEAR
-SPINDLE NT-50
-X / Y /Z TRAVEL 1,350 – 1,000 – 1,010 MM.…

-CONTROL FANUC 16T
-CHUCK 10 INCH. WITH CENTER
-TURRET 12 STATIONS
-X / Z TRAVEL  285 / 500.MM.
-WITH C-AXIS 0.001 DEGREES
-SPINDLE SPEED 35-3500RPM.
-WITH TOOL SETTER
-WITH MILLING FUNCTION…

-CAPACITY 1 TON
-LIFT 3 M.
-TOYOTA 4P. GASOLINE  ENGINE
-MANUAL GEAR
-FORK LENGTH 1,070 MM.…

-SWING 1500 MM.
-DRILLING AND TAPPING…

-CONTROL FANUC 21iTA
-CHUCK 8 INCH.
-TURRET 8 STATIONS
-X / Z TRAVEL 155 / 330.MM.
-WITH OUT TAIL STOCK
-MAX. SPINDLE SPEED 3,500 RPM.…

-WITH DIGITAL SCALE 3 AXIS
-AUTO FEED CUTTING
-TABLE SIZE 1300*300 MM.
-AUTO FEED DRILL…

-CONTROL FANUC OMC
-MAGNET SIZE 1600 * 500 MM.
-WITH COOLANT TANK
-GRINDING HEAD MAX SPEED 1,000 RPM.
-AXIS TRAVEL Y-585 MM. Z-560 MM.…